Header

6/29/2015

Woodworking Tools and Taking Care of Them

It happens sometimes that screws break on the top of the wood. If it happens, use pliers to remove them. If the damaged screw is hidden in the wood then it is better to leave it as it is.

If you can't continue your work due that screw then use a screw extractor to remove it. Screw extractors are easily available in woodworking accessories shops.

This tool take a plug out of the wood. After removing the damaged screw, insert a glued pin in the hole. After doing all this you can start your work again without any hassle.


Woodworking Hand Tools

If you don't want to buy this tool you can try to dig near the damaged screw until you can grab the end with pliers. After you finish this process you must clean the hole so you can insert a glued pin inside the hole.
 


If you want to cover the hole then make a cap from the same wood material you are using and place it on the top of the hole. After doing this, there will be no more texture discrepancy. Most screw accidents happen when you try to attach hinges.

If this happens to you then you must use epoxy resin as this will unite the head with the additional part of the screw. Don't ever try the screw fix method, because this will only rip the wood.


Used Woodworking Tools And Take Care

The most important thing about woodworking is that you have to know how to use and take care of woodworking tools & equipments.

This means you have to keep your knives sharp and you must also dirt free your rasps, chisels, planes and from time to time sharp them as well. For a good and safe job you should also wear special clothes made for woodworkers. You will need hammers & chisels of different sizes.



The most useful tools that you will need are claw hammers as they will help you to extract curved or bad nails. Keep in mind your chisels must be very sharp in order to make a perfect cut, but be careful while using it as lack of attention may result in wrong cuts.

Table saw is extremely important for a woodworker or woodworker's shop especially where many peaces of wood are made on a daily basis. It is considered as a stable of the woodworker's shop.



If you have not used it before, you can't imagine the kind of accuracy, quickness, and stability it provides. If you use a hand saw, your cuts might be off, or the edges may not be straight, and it might take many days to make a peace of wood like a simple table.

On the other hand, a table saw helps you to make straight and right cuts, saves time, and reduces your efforts. You can easily avail a good table saw somewhere around $200-$950.


Woodworking Plans Banner